Foil Forward / Racing catamarans explained

The path to SailGP’s foiling cats

From the Hobie beach-cat boom to America’s Cup flight, owner-driver foiling and Olympic racing: these five boats show how catamaran sailing widened its reach and took flight. Let’s compare the Hobie 16, AC72, GC32, Nacra 17 and F50 at a common scale, then follow the F50 story to Pensacola.

Independent explainer · Research checked November 19, 2026

Compare the boats ↓   Explore the Pensacola connection ↓

The comparison plate

Five catamarans. The same ruler.

Top and side views share one scale: 12 drawing units per metre. AC72 dimensions are class limits; F50, GC32, Nacra 17 and Hobie 16 dimensions are published specifications. Bow points right. Top views omit the rigs. The GC32’s 10 m hull and 12 m overall length are separately marked. Nacra 17 is shown in its current full-foiling Olympic configuration. Detailed deck shapes are illustrative; front-view foil insets are not to scale.

Scroll sideways to compare all five boats; every main view uses the same scale. Open a boat’s specification window below by clicking, tapping or using Tab and Enter. Windows expand below the plate, keeping the neighboring boats visible.

Five boats — scroll sideways to see them all
AC72, F50, GC32, Nacra 17 and Hobie 16 at the same scaleTop and side views at 12 drawing units per metre. The AC72 class envelope is 22 metres long and 14 metres wide; F50 is 15 by 8.8 metres; Hobie 16 is 5.04 by 2.41 metres. GC32 hulls are 10 metres long, 12 metres overall including bowsprit, and 6 metres wide. Nacra 17 hulls are 5.25 metres long and 2.6 metres wide. Rig reference points differ. Hull shapes, foils, rig placement and sail outlines are illustrative.FOIL FORWARD / ONE SCALE · BOW →AC72Foiling · AC34 · San Francisco 2013TOP · RIG OMITTED22.00 m hull-length limit14.00 m overall beam limitMAIN FOIL · FRONT VIEWConcept only · not to scaleCurved shaft + inboard tipSIDE · WING + WORKING JIB40 m rule height40 m: class-rule datum; not flight height.Foils shown in side projection; span hidden.F50Foiling · SailGP 2026 · 24 m wingTOP · RIG OMITTED15.00 m length8.80 m beamMAIN FOIL · FRONT VIEWConcept only · not to scaleT: span on both sidesSIDE · WING + WORKING JIB24 m wingWing measured from illustrative base.Foils shown in side projection; span hidden.GC32Foiling · GC32 Racing TourTOP · RIG OMITTED10.00 m hull length6.00 m beam12.00 m overallMAIN FOIL · FRONT VIEWConcept only · not to scaleJ-foil + T-rudder elevatorsSIDE · SOFT MAIN + JIB16.50 m mast above beamOverall length includes the bowsprit.Soft sails; gennaker omitted.Nacra 17Foiling · Olympic mixed multihullTOP · RIG OMITTED5.25 m hull length2.60 m beamMAIN FOIL · FRONT VIEWConcept only · not to scaleNacra 17: Z-foil main boards (curved, not L-shaped), T-rudder elevatorsSIDE · SOFT MAIN + JIB9.15 m mast lengthCurrent full-foiling configuration.Mast length datum; spinnaker omitted.Hobie 16Non-foiling · Hobie class racingTOP · RIG OMITTED5.04 m hull length2.41 m beamSIDE · SOFT MAIN + JIB8.07 m mast lengthMast measured from illustrative step.Hobie profile simplified from maker reference.10 m · Main views: 12 units/m · Insets not to scale · Shapes illustrative
AC72 — 2013 class reference · specifications

22.00 m hull-length limit; 14.00 m overall beam limit. Rule-defined height limit 40.00 m. Wing area 255–260 m²; soft sails are additional. Eleven crew. Rule sailing weight 5,720–5,920 kg includes wing but excludes crew and soft sails. Human control power, with specified electrical exceptions. Rule 5.4 separately limits cross structure to 26.20 m forward of the stern plane; the illustrated bowsprit is schematic, not a measured overall length. These are class references, not a survey of ORACLE TEAM USA’s boat. [1]

F50 — representative 2026 configuration · specifications

Published length 15.00 m; beam 8.80 m (ROCKWOOL describes this as including foils). The drawing shows a 24 m wing; published options also include 18, 27.5 and 29 m. Wing plus jib. Published sailing weight 2,400 kg, with inclusions not fully defined. Normally six crew; light-air exceptions apply. Battery flight controls and a manually powered wingsheet winch. The drawing represents a comparison configuration; event setups vary. [2] [5] [15]

GC32 — foiling Racing Tour configuration · specifications

10.00 m hull length; 12.00 m overall including bowsprit; 6.00 m beam. Mast height 16.50 m above the beam. Published total boat weight 975 kg; five crew. Soft main 55.30 m², small/big jib 19.02/24.17 m², gennaker 88 m². J-shaped main foils and T-rudder elevators; rope-operated controls, no hydraulics. Gennaker omitted in this comparison. Builder specifications; Class configuration.

Nacra 17 — full-foiling Olympic configuration · specifications

5.25 m hull length; 2.60 m beam; 9.15 m mast length. Manufacturer’s current ready-to-sail boat weight: 173 kg. Two-person mixed crew. Soft main 16 m², jib 4.05 m² and spinnaker 17.83 m². Carbon Z-foils and T-rudders with elevators; active rudder-rake system. This shows the current full-foiling configuration, including the 2022 rudder-system update, not the earlier Rio or Tokyo setup. Spinnaker omitted; bowsprit projection is illustrative. Nacra Sailing specifications and configuration.

Hobie 16 — standard beach cat · specifications

Hull length 5.04 m; beam 2.41 m; mast length 8.07 m. Boat weight 145 kg, excluding crew. Two-person racing crew; soft main and jib approximately 20 m² combined. Manual control; standard boat has no lifting hydrofoils or centerboards. [3] [4]

Dimension sources: AC72 Class Rule; SailGP 2026 media guide; International Hobie Class; Hobie Japan; The Great Cup; Nacra Sailing. Mast, wing and beam measurement definitions differ. The AC72’s 22 m hull limit excludes the bowsprit; its drawn projection is illustrative. Hulls, sail shapes, foil geometry and positions are simplified. Main boat views retain the common scale; the front-view foil insets are not to scale. The baseline is a drawing reference, not a depicted flight height. Side views show foil chord/projection rather than transverse span. Visual references: Chevalier’s AC72 study, France SailGP team’s F50 diagram, and Hobie factory assembly manual. Plan-view references also include Chevalier’s AC72 platform study and SailGP’s annotated F50 platform. Cockpit recesses, fairings, netting, foil cases and bowsprits are representative, not surveyed component dimensions. Profiles are interpretive, not measured engineering drawings; the AC72 retains class-limit dimensions rather than claiming a surveyed ORACLE configuration.

The specifications, with their limits

Reference values—not five identically defined measurement sets
Measure AC72 (2013 rule) F50 GC32 Nacra 17 Hobie 16
Length × beam 22 m hull max × 14 m overall beam max 15 m × 8.8 m 10 m hull; 12 m overall × 6 m beam 5.25 m hull × 2.60 m beam 5.04 m × 2.41 m
Rig reference 40 m rule height 24 m wing illustrated; 18, 27.5 and 29 m options also reported 16.50 m mast height above beam 9.15 m mast length 8.07 m mast length
Published mass 5,720–5,920 kg rule sailing weight 2,400 kg sailing weight 975 kg published total boat weight 173 kg current manufacturer ready-to-sail boat weight 145 kg boat weight
Crew 11 Normally 6; reduced configurations used 5 2 mixed 2 racing
Sails 255–260 m² wing; headsails additional Modular wing and jib; configuration varies 55.30 m² main; 19.02/24.17 m² jibs; 88 m² gennaker 16 m² main; 4.05 m² jib; 17.83 m² spinnaker About 20 m² combined soft sails
Underwater system Foiling daggerboards and rudder elevators T-foil main boards and rudder elevators J-foils and T-rudder elevators Z-foils (curved), T-rudders not yet
Control energy Human power, with specified rule exceptions Battery-assisted electrohydraulic systems; manually powered wingsheet winch Manual rope controls; no hydraulics Manual controls; active rudder-rake system Manual sheets and tiller

[1] [2] [3] [4] [5] [15] These mass figures have different definitions. The AC72 rule includes its wing but excludes crew and soft sails; the F50 guide does not define all inclusions; Hobie’s figure excludes crew. GC32 is the builder’s total boat weight; Nacra’s current figure is ready-to-sail boat weight. Crew and event loadings are not harmonized. Do not use them as a like-for-like displacement ranking. GC32 source; Nacra 17 source.

Lengths and beams also use different definitions. The AC72’s 22 m limit applies to its hulls; Rule 5.4 separately permits cross structure up to 26.20 m forward of the stern plane. ROCKWOOL’s F50 reference describes the published 8.8 m beam as including foils. The plate’s beam labels are published references, not a survey of clear hull-to-hull width or every event’s foil span. GC32 sail areas here follow the current builder’s listed sail package. [1] [31] [27]

The beach-cat beginning

Why the Hobie?

For many sailors and non-sailors, the most recognizable catamaran is still a Hobie: two curved hulls, a trampoline between them and a bright sail above. Hobie helped launch the modern beach-cat boom, bringing fast, lightweight catamaran sailing to beaches everywhere. That cultural contribution belongs in the story of today’s foiling cats, even though the Hobie 16 is not their direct design ancestor.

The distinction matters. Hobie was hardly the first catamaran. Nathanael Herreshoff’s Amaryllis, for example, was launched in 1876. But nearly a century later, Hobie hybridized the stable footprint with durable efficient sails to popularize beach launches with thrilling speed.  The brand’s history dates the Hobie 14 to 1968 and the Hobie 16 to 1970; the Japanese class association describes the 16 as one of the world’s most widespread catamaran classes. [20] [21] [22]

The Hobie 16’s asymmetrical hulls stand in for centerboards, and its double trapeze lets the two sailors suspend their weight outboard to counter the tipping force. On a standard Hobie 16, “flying a hull” means lifting the windward hull clear of the water while the leeward hull remains in the water. Foiling takes this lifting idea further: underwater “wings” lift the boat so both hulls can rise clear. [3] [22]

In this context, Hobie does more than provide a recognizable boat for the scale drawing. It represents the participation side of this history: an alluring way to get people sailing fast on two hulls – perhaps the bridge to foiling. The table’s “not yet” is a playful nod to that potential; the standard Hobie 16 shown here is non-foiling, not an announced foiling model. Hobie also produced the separate TriFoiler, a hydrofoiling trimaran; “not yet” refers only to the standard Hobie 16 in this comparison. [16] [20]

Several paths converge on flight

The five boats on this page are selected landmarks, not a complete history or a single family tree. The AC72 made foiling a defining America’s Cup spectacle. The GC32 adapted that excitement to a smaller one-design with conventional sails. The Nacra 17 brought full foiling into Olympic mixed-crew competition. The F50 developed the Cup’s later AC50 into SailGP’s shared professional racing platform. These are related ambitions, with different boats, crews and purposes.

Four expressions of foiling

From Cup spectacle to different kinds of racing

AC72: a breakthrough on the biggest stage

The 34th America’s Cup, held in San Francisco in 2013, put large, wingsailed foiling catamarans in front of a worldwide audience. The AC72 was a development class: teams designed their own boats within a rule, rather than receiving identical equipment. Its 22-metre hull-length limit and 14-metre beam limit explain the scale of the challenge, but the shared envelope did not make the boats interchangeable. [1] [19]

Full foiling emerged from a clever reading of the AC72 rule. Rule 9.6 prohibited daggerboard components such as trim tabs or movable winglets that could be adjusted while racing; Rule 8.6 imposed a similar restriction on rudders. Moving the whole daggerboard within the rule’s constraints provided a route to controlling lift. Team New Zealand explored that legal opening, combining foil geometry with a workable control system. In its account of the breakthrough, the team describes research beginning in 2011, testing on smaller craft, and an AC72 built with full foiling in mind. It was a design strategy developed within the rule, rather than simply bolting hydrofoils onto a completed boat. [1] [28]

In San Francisco, ORACLE TEAM USA recovered from an 8–1 deficit to beat Emirates Team New Zealand 9–8. Eight consecutive race wins completed the comeback on September 25, 2013. Jimmy Spithill helmed and Ben Ainslie called tactics during the recovery, supported by the sailors, designers, engineers and shore crew. The sporting drama made the boat’s flight impossible to ignore. [6]

GC32: foiling beyond a Cup campaign

The GC32 bridged the spectacular adventure of the AC72 and a racing boat that owner-driver teams can campaign. Designed by Martin Fischer, it has 10-metre hulls and a 12-metre overall length including its bowsprit. Its five-person crew handles a conventional rotating mast, mainsail, jib and gennaker, rather than a rigid wing. [23] [27]

According to the class association, the AC72 inspired the Mk2 foil package fitted in spring 2014, which turned the GC32 into a fully flying catamaran. That is a documented influence, not evidence that the GC32 is an AC72 hull scaled down. Its J-shaped main foils and T-rudder elevators form its own arrangement. Rope-operated controls and the absence of hydraulics distinguish the experience from an F50. [23]

The GC32 Racing Tour was designed to attract both owner-driver and commercially backed professional teams. Its significance here is organizational as well as technical: a one-design class offered another setting for foiling competition, with simpler rig logistics than a Cup-style wing. “More accessible” remains relative to elite racing campaigns; a GC32 still calls for a trained, very physical crew and substantial preparation. [23]

Nacra 17: the Olympic route to full foiling

The Nacra 17 puts this change into a much smaller, two-person platform. It made its Olympic debut in the mixed multihull event at Rio 2016, then evolved into a fully foiling boat for Tokyo 2020, the Games held in 2021. World Sailing explicitly describes that post-Rio upgrade. The Rio-era boat and today’s full-foiling Nacra 17 should therefore not be treated as the same configuration. [25]

In the current version, a mixed crew manages soft sails, Z-foils and T-shaped rudder elevators, with active rudder-rake adjustment. The updated elevators and rudder rake adjustable during racing debuted at Palma in 2022, after Tokyo, for the Paris Olympic cycle. [24] At 5.25 metres long, the Nacra is close to the Hobie 16 in hull length, yet their underwater systems and sailing demands are very different. The comparison drawings make that contrast visible: similar size does not mean similar behavior. [26]

The Nacra’s place in this story is Olympic development: standardized equipment, two sailors and the added demands of keeping a boat in controlled flight while racing. It is a distinct branch of modern catamaran sailing, rather than a miniature F50 or a step in the F50’s ancestry.

F50: the Cup connection becomes a league

The F50’s direct starting point was the AC50 used in the 35th America’s Cup, held in Bermuda in 2017. Three AC50s left over from that competition were converted for SailGP’s inaugural fleet, alongside three newly built F50s. The AC72 belongs to that earlier Cup chapter; the F50 is a development of the AC50, not a renamed AC72. [2]

SailGP began racing in Sydney on February 15–16, 2019, with six national teams. Larry Ellison and Russell Coutts carried their Cup connection into a recurring international circuit. The 15-metre F50 pairs a rigid wing and jib with a standardized platform that continues to develop across the fleet. [2] [5] [7]

That shared development model differs from the AC72 design contest. It also differs from the GC32’s conventional rig and the Nacra’s two-person Olympic format. The F50 in the comparison plate uses a representative 24-metre wing; actual wing, foil and crew choices vary. “One-design” describes the shared equipment framework, not a promise that the boat never changes.

What changes when a catamaran lifts clear?

A foil generates lift as water flows around it. Once enough lift supports the boat, the hulls rise clear and hull drag drops. The main lifting boards and the smaller rudder elevators work together; the latter help control pitch.

Seen from the front, the older L-shaped main foil positions its lifting surface principally to one side of the shaft. A T arrangement extends to both sides. That outline is only the beginning: section shape, span, stiffness, angle and the control system determine how it behaves. A T shape alone does not guarantee a particular speed.

Consider the five boats as different solutions to different sailing jobs. The Hobie 16 remains supported by its hulls. The foiling AC72 represents a team-developed Cup design; the GC32 uses J-shaped lifting boards; the current Nacra 17 uses Z-foils; and the illustrated F50 uses T-shaped main foils. These letter names describe geometric shape, not a ladder from primitive to advanced. They do not mean the boats share interchangeable parts or identical control systems.

A soft sail can drive a foiling boat: both the GC32 and Nacra 17 demonstrate that. A rigid wing is therefore not the dividing line between displacement sailing and flight. The decisive change is how the boat’s weight is supported, together with the crew’s ability to control height, pitch and balance. [23] [26]

SailGP’s recent L-to-T transition

  • 2019–2024: SailGP raced with its earlier L-shaped main foil system.
  • January 2025, Auckland: high-speed T-foils entered racing after nearly two years of development. Their construction combines titanium and carbon fibre. A Canadian test reached 101.98 km/h—an experimental result, not a race record. [8]
  • September 2025, Geneva: the light-air T-foil and rudder package debuted across all 12 teams on the first day. [9]
  • November 2025, Abu Dhabi: a new 27.5 m wing entered competition after testing in Cádiz. [10]
  • September 2026, Geneva: the US team’s event log records light-air T-foils, rudders, a 27.5 m wing, J1 jib and four sailors. This is an event-specific configuration, not proof of the Pensacola boat’s fit-out. [17]

The wider story returns to Pensacola through one of these five boats: the F50. Its training base connects the professional racing branch of foiling to a local marine community.

Pensacola: American Magic: SailGP

As an organization, American Magic has significant experience with high-performance foiling yachts, representing the New York Yacht Club in the 2021 America’s Cup campaign in Auckland and the 2024 campaign in Barcelona. The American Magic yachts and team organized and prepared for both campaigns from their base on Pensacola Bay.  For that racing history and the boats behind it, see our original American Magic explainer: from The Mule to 13 Stripes.

American Magic’s High Performance Center opened on January 7, 2026. SailGP announced its long-term training-base partnership that day, initially targeting September training. [30] American Magic’s October 19 release marked the arrival of athletes and an F50 and the start of the year-round training operation, with the partnership running through 2031. [11] The facility provides shared access for the league’s 13 teams, with SailGP coordinating training allocations. That is a shared training operation, not an exclusive US-team headquarters. [11] [18]

Separately, a Doug DeVos-led acquisition brought Denmark’s ROCKWOOL Racing SailGP team under American Magic in February 2026. SailGP’s acquisition announcement reported a price of more than US$60 million. The acquired Danish team and the US SailGP Team are distinct teams. [12]

With American Magic’s Pensacola base now serving as SailGP’s North American training base, American Magic fans can expect to see more F50s and the teams that sail them on Pensacola Bay. Follow the local conversation and share what you’re seeing in the PFAM Facebook group’s Discussion tab.

What American Magic Services brings

American Magic Services (AMS) is American Magic’s engineering and manufacturing arm. Its stated capabilities include composite design and manufacture, systems integration and testing, with applications extending beyond racing into marine and aerospace work. [13]

There is also a concrete SailGP support history: in 2025, the league described wingsail upgrades undertaken through its Southampton operation and American Magic’s Pensacola facility. The work addressed bonding defects in shear webs inside the first wing element, with strengthening and reinstallation of electronics. The announcement does not assign every task to AMS, nor establish a standing contract for every F50 component. [14]

For Pensacola, the significance extends beyond a fast boat: specialist facilities, recurring training and connections to local education can support a deeper marine skills base. The City describes workforce and internship links involving the University of West Florida and Pensacola State College. [18] These are foundations for opportunity, not a guarantee of future investment or jobs.

The path continues, on and above the water

Hobie’s lasting contribution is the reach of beach-cat sailing. The AC72 showed what an elite development contest could make possible; the GC32 created another home for foiling teams and owner-drivers; the Nacra 17 carried full foiling into Olympic mixed competition; and the F50 made evolving shared equipment central to an international league. These boats belong in the same conversation without belonging to one uninterrupted design lineage.

Foiling expands the choices. It does not erase the appeal of a non-foiling catamaran, or make every sailor’s next boat a faster and more complex one. The shared thread is the attraction of wind-driven speed over water, on two hulls in this case, and the communities that form around it.

Foil Forward’s Pensacola Marine Vision explores how watercraft, technical capability and local enterprise can connect. A maritime cluster remains a vision in development. The F50’s local presence gives this wider catamaran story a practical connection to that conversation.

Independent reporting; no affiliation or endorsement implied.

Sources and measurement references

  1. AC72 Class Rule, May 24, 2013
  2. SailGP 2026 media guide (April 2026 PDF); SailGP media-guide landing page
  3. International Hobie Class: Hobie 16
  4. Hobie Japan: mast length and dimensions
  5. F50 ancestry and technology, October 30, 2026
  6. World Sailing: ORACLE TEAM USA’s comeback
  7. Australian Sailing: SailGP launch and first season
  8. SailGP: high-speed T-foil rollout, January 2025
  9. SailGP: light-air T-foils in Geneva, September 20, 2025
  10. SailGP: the 27.5 m wing
  11. American Magic: Pensacola training base opening, October 19, 2026
  12. SailGP: DeVos-led ROCKWOOL Racing acquisition, February 12, 2026
  13. American Magic Services: capabilities
  14. SailGP: wingsail repairs and upgrades, May 12, 2025
  15. SailGP: crew roles and wingsheet winch
  16. Hobie: TriFoiler promotional archive video
  17. U.S. SailGP Team: Geneva 2026 configuration
  18. City of Pensacola: High Performance Center, January 7, 2026
  19. America’s Cup: the birth of foiling in the Cup
  20. Hobie Eyewear brand timeline: Hobie 14, Hobie 16 and TriFoiler launches
  21. Herreshoff archive: Amaryllis, launched in 1876
  22. Japanese Hobie Class Association: beach sailing and worldwide participation
  23. GC32 Class Association: design, 2014 foiling conversion and rig
  24. International Nacra 17 Class: 2022 elevator and adjustable rudder-rake upgrades
  25. World Sailing: Nacra 17 transition from Rio to Tokyo
  26. Nacra Sailing: current Nacra 17 configuration and specifications
  27. GC32 builder: dimensions, crew and specifications
  28. Emirates Team New Zealand: the development of full foiling within the AC72 rule
  29. America’s Cup: Bermuda, AC50 and the 35th Cup in 2017
  30. SailGP: Pensacola partnership launch and planned training start, January 7, 2026
  31. ROCKWOOL: F50 beam definition (legacy configuration reference)

References include class rules, manufacturer specifications, league reports and event logs.